comtherm_logo


heater

Comtherm manufactures the complete range of Eurograde gas and oil burners.

This range includes monbloc packaged industrial gas and oil burners, in addition to gas nozzle mix and oil pressure jet burners that facilitate the use of seperate combustion air fans.
The Eurograde gas nozzle mix equipment is particularly established in the metal melting furnace industry and the monobloc units have been used in the Biogas / Waste Gas / Dual Fuel burning industry for over thirty years.

The top picture (right) shows the application of four Eurograde EFVG burners, to a 30 Ton tilting aluminum melting furnace.

A complete service of installation, commissioning and maintenance of the Eurograde burner equipment is offered.

Comtherm co-operates closely with Eurograde Thermal Systems Ltd., who can offer a complete specification, supply, installation and maintenance service for most types of thermal system, including :

  • Steam Boiler systems.
  • Water boiler systems.
  • Heating system designs.
  • Natural gas and Biogas systems including Flare Stacks.
  • Electrical & PLC design.
  • Steam boiler strip down for annual insurance inspections.
  • Hot water boiler cleaning and repairs.

The scope of work undertaken can include project management and the provision of all information necessary to comply with the CDM regulations and site Health and Safety laws.

The photograph (left) illustrates a boiler house installation, designed and installed by Eurograde.
The middle photograph (right) shows a typical Eurograde boiler installation complete with dual fuel / biogas / oil burner.
The bottom photograph shows a completed installation of a Eurograde V2000-IND flare stack, with capacity to combust 220 cubic metres per hour of biogas from a anaerobic digestion reactor.

Please contact us for further information.

heater

heater

heater

2009 Comtherm. All Rights Reserved

Comtherm Limited accepts no responsibility or liability for the accuracy of information provided on this web-page. technical data and dimensions should be confirmed with the relevant Comtherm Limited Sales or Technical office.